HOME  »  Bed Knobs and a Broomstick »  Viewing MMT and Stuffer     [Image 9 of 27]  :: Jump To  
  First slide Previous slide      Show/Hide EXIF Info Index Page Start/Stop the slide show      Next slide Last slide Help
Comment: The motor mount tube. Note the phenolic liner to the left (rocket forward) and the Kaplow Clips and gussets to the right.
Nose Bulkhead * It doesn't look like a bulkhead, but it becomes one. The shock cord will attach to the loop in the bridle. * 1671 x 1832 * (633KB)

Bridle Detail * Detail of the shock cord bridle, behind the bulkhead. * 2073 x 1510 * (680KB)

Nose Bulkhead Installation * The nose shock cord bridle and bulkhead assembly installed in the tubing coupler. This will go in the aft end of a short body tube; the nose cone will be attached to the forward end. * 1613 x 1840 * (690KB)

MMT Detail * Motor mount, showing the centering ring, blind nut, and strengthening guessets. * 1775 x 1519 * (565KB)

MMT and Clips * Motor mount, stuffer tube, and Kaplow Clips. You can see the window screen retaining clips on the right (rocket aft), and the gussets. * 2321 x 442 * (288KB)
Next slide
 
MMT and Stuffer.jpg - 2339 x 774 - (497KB)
Download file (497KB)
4/24/10 2:20 PM
Tail Cone Assembly * The tail cone is made of posterboard. After inserting some stiffening rings, I coated it with thin CyA for strength and stiffness. (The cone is about 30 cm long.) * 853 x 2444 * (478KB)

Aft Cone Assembly * Assembly detail of the aft cone (the broom). Note the blind nut threads for the Kaplow Clips, the launch lug and launch rod hole (dowel is through the lug and hole, into the cone, for alignment), and the cardboard stiffener inside the cone. * 1980 x 1813 * (695KB)

Nose Aft * Aft end of the nose cone assembly. * 1920 x 2560 * (960KB)

Unstained Nose * Nose cone (the bed knob), ready for staining. Thanks to my friend Dan Schkolnik for turning it! * 805 x 1806 * (512KB)

Stained Nose * Balse is not known for its beautiful grain, but this still stained up nicely. * 746 x 2281 * (545KB)
Album last updated on 5/6/10 10:53 PM
Powered by Jalbum 8.8 and BluPlusPlus skin
Copyright © 2010 Alan M. Marcum, all rights reserved.